Hot keywords：PVC protective film Heat-resistant protective film PET protective film
Search
Search
Search
High-cleanness PE protective film
Product features:
It is made via using high-transparency PE film and coating PSA adhesive, it has good sticking property, low viscosity, smooth surface of adhesive tape, good water resistance, weather ability and acid-alkali resistance.
Product application:
It is used for the processing and shipment of common glass and tempered glass, LCD light panel production protection, spreading film die cutting punching protection;
PC, PMMA, PET smooth panel, high-gloss injection molding surface protection, surface protection during product transportation process;
Organosilicon PET protective film
Product features:
Low viscidity, self-exhausting, easy to stick and peel, and there is no Si transfer after peeling, good wettability, excellent re-sticking property, dry-grade dust-free production, superior cleanness, high strength, high temperature resistance, good weather resistance, high transparency, and the sticking body can be checked under sticking condition;
Product application:
It is used for touch screen glass, ITO Sensor shipment protection, ITO Glass/Film processing, various smartphones, tablet PC and other panel display, touch panel scratch-resistant protection, optical PMMA, PC, PET panel protection, LCD polarizer, diffusion sheet, brightening slice and other various optical film protection, foam, OCA, copper foil die cutting punching protection, FPC supporting protection, etc.
UV-proof protective film
Product features:
It is featured by UV resistance, high transparency, no color and luster change. Heat resistance is below 85℃ and performance is table.
Product application:
Polarizer, tempered glass.
PU glue protective film
Product features:
High transparency, no transfer, good sticking performance, exhausting property is superior to acrylic protective film, easy to peel, no residual, no noise, and free from static electricity;
It has good acid resistance and weather resistance, and the sticking matter can be checked under sticking condition.
Product application
It is used for touch screen glass, ITO Sensor , HC, Primer, AS and other surface treatment panel or protective film, various smartphones, tablet PC and other panel display, touch panel scratch resistant protection.
No.23, Xitai Road, Zhitang, Shaxi Town, Taicang City, Jiangsu Province.
全部分類
-
Talking about the Application Field and Basic CharacteristiPE protective film to a special polyethylene (PE) plastic film as the substrate, a cross-linked acrylic resin as adhesive, and then after several special additives processing. Soft nature, good adhesi - China's protective film development continues to heat up, t 23-11-08
- PE protective film in the Chinese market is developing rapid 23-11-08
- Plastic packaging gradually green to the development of more meaningful 23-11-08
- New Technology of Plastic Packaging and Optimistic Development Prospects of New Materials 23-11-08
- 23-11-08
- 23-11-08
- 23-11-08
- 23-11-08
- 23-11-08
A
China is rapidly moving from a net importer of protective films to a net exporter. In the next few years, India's protective film production capacity will be doubled. For brand operators and machinery suppliers, these are good news, but this huge growth will not last long. That in the medium term do not expect any change in its needs. The performance of the protective film is suitable for a variety of flexible packaging applications and is inexpensive, but BOPET and BOPA will cut a market globally.
PE protective film in the most popular products, machinery in the field of technology to make its production capacity than the 80's increased by 5 times. This is due to the increase in the speed of the production line to more than 500m per minute, the width of 10 meters. Asia is still the fastest growing PE protective film market, at least in the film stretch production line is so. Asia has been more focused on low-volume water-cooled blown film process, but now in Asia are established modern protective film factory.
PE protective film production, according to the different varieties, can be used to fill the gap or contact winding. As the tractor on the cutting knife fixed, so in contact with the winding, if the control is not easy to lead to air into the film caused by wrinkles, thus affecting the quality of winding.
PE protective film winding, due to the role of tension is not balanced, will inevitably appear Alice phenomenon; and because of the large membrane volume of the number of layers, when using a fixed cutter trimming, the cutter in the production process Can not move around, so PE protective film into the winding, can not move around, which makes the film at both ends of each film side in the same position overlap, when the membrane at both ends above the middle part of the middle of the protective film pressure Not be affixed, it is easy to lead the air was brought with the film roll, resulting in poor quality and other defects.
If the protective film can be moved left and right, that is, so that the outermost end of each film does not overlap in the same position, then the cumulative thickness of the membrane at both ends of the thickness is not thicker than the middle part. This winding, the winding roller pressure on the film surface pressure more straight, affixed. To achieve this goal, the original traction system of the cutter device can be converted into left and right automatic cutting device.
A
China's protective film industry development and market demand is not coordinated, because the market demand is gradually increased, but doubled growth, and a single species. Our domestic enterprises are reluctant to invest in the development of new products, resulting in vicious competition, competing prices, export prices are too low, business efficiency. In order to get out of the dilemma as soon as possible, the enterprise must increase the product variety according to its own advantages and characteristics, improve the product grade, work with the users to develop new products, broaden the application area of ??the protective film, take the product differentiation way, in order to improve the profit rate, Thin film over the difficulties.
Colorful plastic flexible packaging with its excellent overall performance, reasonable prices and conducive to the environment and become the fastest growing packaging industry products, continue to replace other packaging, the use of growing, is expected in the next few years will continue to maintain good growth momentum. In order to improve the market competitiveness, plastic flexible packaging to the thin wall, high-performance direction.
Today, in the field of protective film production in China, foreign production experience of the manufacturers and their advanced technology has been with their investment into the domestic industry, to promote the development of the industry.
A
PE protective film applications
PE protective film is often used in stainless steel plate, aluminum plate, aluminum alloy profiles, steel profiles and doors and windows, aluminum-plastic plate, fluorocarbon board, mirror panels, sandwich color plate, fire board, decorative panels, plexiglass plate, PVC board sunshine board (polycarbonate board), security doors, signs, coated glass, high-grade furniture, high-grade handicrafts, electrical cabinets, computer shell, automotive lighting, flooring, household appliances shell, instrumentation, and other areas need to protect Product surface.
PE protective film characteristics
1. PE protective film thickness: 0.03mm-0.15mm.
2. color: transparent, blue, black, milky white, black and white background, special colors can be set according to customers.
3. width: 1650mm or less, the length of 1000M or less.
4. adhesion: 5-610g / 50mm
LINKS
